M380519-C Teng 19mm 3/8" Drive standard Socket

M380514-C TENG 3/8ib Dr Socket 14mm

1292AG-E4 1/2in dr. Torque Wrench W/AG 70-350nm

1292AG-E4 - 1/2in DriveTorque Wrench Torque wrench according to DIN3122. With ratchet, the torque wrench can be used for both tightening, and final checking of the torque. Reversible with lever, but only for right-hand action torque checking. Equipped...

TBNSi5 Teng Nut Setter Set Impact 5pce

TBNSI5 | Teng Impact Nut Setter Set 5pc   A set of 5 Impact Nut Setters for use with impact power tools. S2 steel material with HRC50-60 hardness. The new design creates even higher torsion for easier use. A recessed magnet holds the fastening (ferrous...

TMSE05S Teng Screw Extractor 5Pc

  TMSE05S – 5 Piece Screw Extractor Set   • For quick and easy extraction of broken screws, pipes and stud bolts. • Square Shank. • Hardened to HRC 50-52. • Supplied in a plastic box with snap locks.   5PC -- #1 , #2 , #3 , #4 & #5 extractors  

T1420 Teng 20pc 1/4in dr. super mini metric and bits set

T1420 - 20 Piece 1/4in Drive Socket & Bits Set 20 piece 1/4” drive socket set containing 6 point sockets, bits ratchet handle, magnetic bits holder, plus 11 bits. Supplied in a plastic case with snap lock and metal pin hinges. (105x60x32mm, 0.2...

Teng 710H 9mmsnap off blade. box knife 125mm plastic

 Hobby knife featuring a plastic casing with a break off tool and pocket clip. The knife comes supplied with one 9mm snap off blade.

1292AG-EP 1/2in DR. Torque wrench W/AG 40-210NM

      1/2" drive torque wrench which can be used for both tightening and final checking of the torque. The torque wrench is reversible with a lever but only for right hand action for torque checking. Equipped with an angular gauge for after tightening...

3892ag-e3 3/8in dr. torque wrench w/ag 20-100nm

3/8" drive torque wrench which can be used for both tightening and final checking of the torque. The torque wrench is reversible with a lever but only for right hand action for torque checking. It's equipped with an angular gauge for after tightening...